Tmsystems Project RMI User Manual download pdf

RMI USER MANUAL

1.0 DESCRIPTIONS

RMI is a remote microphone input modular work together with RMI, which will be

used to input remote microphone. Two microphone inputs by XLR type connector are

included, while both of them are designed of bass and treble tone control, moreover,

master volume control of each microphone inputs are provided for dedicated control. A

remote mic VOX mute button is provided to override the background music system

when enabled. The communication between the panel and the matrix is through

universal industrial standard CAT5 cable, which also is used to supply power from the

matrix to this panel within 50 meters. There are total 8 units of remote control panels

could be work together with the matrix.

It will be very useful to be installed at a remote place which could be used to input

priority microphones.

2.0 FRONT PANEL & REAR PANEL

2.15

2.16 MIC2 SINGAL INPUT Connector to input microphone signal to the PCB

board

2.17 MIC2 CONNECTOR

3.0 CONNECTION & WIRING

3.1 Power supply. The RJ45 port is used to communicate between the remote

control panel and the matrix, it also will be used to power supply the panel

within 50 meters. While spare DC24V input is provided for extra power soupy

to the remote control as soon as the communication distance is longer than 50

meters. The communication cable shall be universal industrial CAT5 cable.

3.2 Microphone input. The mic input's 3 pins at the back side will be send to

the PCB board through the microphone signal input.

3.3 Aux output: Aux output is included in the Rj45 communication port, a spare

aux output is also provided.

3.4 SPARE AUX OUTPUT & SPARE 24V DC INPUT.

3.5 RJ45 communication port.

5.0 SPECIFICATIONS

4.0 OPERAT10N

4.1 Power Supply. The remote control panel will be power on whether there is

DC24V from the matrix or extra equipments. The power indicator will be light

on blue, which also will be as status indicator to display the communication is

well or not.

4.2 Volume & Tone Control. A ten levels volume control is provided for each

microphone inputs, separate bass and treble tone control is also provided

Mic Input

Aux Output

Frequency Response

ControlsVolume control, bass and treble of Mic1 and Mic2

Power Supply

Weight161g

86x146x33(mm)

10mV

775mv

50Hz-18KHz ( 10dB)

S/N Ratio

70dB

THD

1% @1KHz

Controls

DC 24V

161g

Dimension(W x D x H)

+24V

Audio-

Audio+

GND

485-B

485-A

RED

GND

24V1

Audio

2.1 MIC2 INPUT Local microphone input by XLR type connector

2.2 MIC1 TREBLE CONTROL Tone control over microphone1 input, clockwise

adjustment to increase the treble level from low to high.

MIC1 BASS CONTROL Tone control over microphone1 input, clockwise adjustment

to increase the bass level from low to high.

2.4 MIC2 TREBLE CONTROL Tone control over microphone1 input, clockwise

adjustment to increase the treble level from low to high.

MIC2 BASS CONTROL Tone control over microphone1 input, clockwise adjustment

to increase the bass level from low to high.

2.6 MUSIC MUTE. The button is used to override the local input microphone over the

background music system when it is enabled.

2.7 MIC2 MASTER VOLUME CONTROL Tone control over microphone1 input,

clockwise adjustment to increase the volume level from low to high

2.8 MIC1 MASTER VOLUME CONTROL Tone control over microphone1 input,

clockwise adjustment to increase the volume level from low to high.

2.9 POWER LED. The LED will be light on blue after power on and will be extinguished

after power off.

MIC1 INPUT Local microphone input by XLR type connector

MIC1 SINGAL INPUT Connector to input microphone signal to the PCB board

MIC1 CONNECTOR

2.14 SPARE AUX OUTPUT TO AMP.

2.10

2.11

2.12

2.13

2.3

2.5

Rj45 COMMUNICATION PORT The RJ45 port is used to communicate between the

remote control panel and the matrix, it also will be used to power supply the panel

within 50 meters.

SPARE 24V DC INPUT, Extra DC 24V will be needed to power supply the

remote control panel when the communication distance is longer than 50

meters.

Applicable models

Drawing version

Design

Page

Audit

Material

and

Colour

Drawing type

Drawing model

Date

Units

IM-01454

Drawing

1/1

ZHANGLIANG

/RMI

146mm

86mm

MIC1

MUSICMUTE

HF LF

MIC1

RMI

MIC2

MIC 2

HF LF

MIC1 MIC 2

VOLUME

2011-08-01

V0.1

MIC1

MUSICMUTE

HF LF

MIC1

RMI

MIC2

MIC 2

HF LF

MIC1 MIC 2

VOLUME

9 8

1 2

RMI USER MANUAL 1

Summary of Contents

Page 1 - RMI USER MANUAL

RMI USER MANUAL1.0 DESCRIPTIONS RMI is a remote microphone input modular work together with RMI, which will be used to input remote microphone. Tw

Comments to this Manuals

No comments

Tmsystems Project RMI User Manual

Browse online or download User Manual for Multimedia Tmsystems Project RMI. t&amp;mSystems Project RMI User Manual [de]

Summary of Contents

Comments to this Manuals

Related products and manuals for Multimedia Tmsystems Project RMI

Browse online or download User Manual for Multimedia Tmsystems Project RMI. t&mSystems Project RMI User Manual [de]